How to use craftsman wet dry vac for water?

When difficult issues like a broken pipe, clogged toilets that have overflowed, or minor flooding from a heavy rain turns up around the house or at work, the solution item for cleaning up the mess that comes to mind is the wet dry vacuum.

Wet-dry vacs have proven to be extremely useful in homes, garages, work sites, or workshops. The equipment helps pick up almost every type of debris, both liquid, and dry materials. It can handle messes from spilled milk to shattered glass and prevent costly damages.

How to use craftsman wet dry vac for water?

Now, just like the regular wet dry vacs, Craftman’s is versatile and very suitable for professional workspaces. The equipment is easy to use if you know how – which brings us to the question “how to use craftsman wet dry vac for water?”

Sucking up water with a craftsman wet dry vac will only take a few minutes and requires no extra tool if you can follow some quick steps to using it. Learning them can help to get the best performance out of the power tool.

Safety First

Before going deep into the process required to use the Craftsman wet dry vac, you need to be aware of the safety conditions. You should read and understand the user’s manual and all the labels on the equipment to be familiar with it.

KEEP IN MIND

  • Leaving the vac running while unattended or using the wrong accessories might be dangerous. It is better to use only the Craftsman’s recommended accessories and unplug the device before cleaning or changing filters to avoid accidents.
  • Vacuuming dust, vapor, or toxic materials could be hazardous to the health if you do not take a few cautions. Improper storage, exposing the wet-dry vac to rain, or allowing the liquid to enter the motor compartment can create the risk of electric shocks.
  • While using the vacuum, keep hairs, loose clothes, fingers, or anything from the openings or moving parts. Also, to reduce the risk of fire or explosion, ensure you are not vacuuming near flammable or combustible liquid like fuel or gasoline, cleaners, oil-based paint, paganism or grain dust, aluminum dust, gun powder or lighter fuel.

Understand the features

Although the craftsmen wet dry vac is versatile and can function in different aspects, it is specifically intended or designed for light vacuuming and household use. It is helpful to be familiar with the features.

The contents of the pack include the vac, hose, car nozzle, crevice tool, dusting brush, owners manual, and replacement filters, and retainer bands already assembled.

Some of the parts you should get familiar with is the tank, vacuum port, blowing port, conveniently positioned carrying handle with the on/off switch, tool storage, power cord tightly around the dust drum, hose storage on the powerhead, filter and retainer band, and two easy to open latches.

How to vacuum water

  1. When you have your craftsman wet dry vac, you should access the filter under the motor to unlock the top – to do this, pop up the locks behind the handle. Then pull the motor off the top of the vacuum to expose the filter that is connected to the underside.
  2. You can now use your hand to pull the filter out of the connector and take it out of the vacuum. Remember that the filter should be kept safe and untampered, so put it in a clean area. Return the motor into the vacuum cleaner and snap the handle back in position to lock it in.
  3. Now you can connect the hose on the wet dry vac, fit in the right attachment to suck up water and vacuum up the liquid. Flip the on the switch and begin to vacuum, but there is a built-in mechanism to give an alert and shut the motor off when the liquid is getting close to it.
  4. Once it is off, carefully takes the motor out and pour out the liquid. If the job is not completely done, you can replace the motor in the vacuum cleaner again and continue sucking up the water until the job is done.

By the way, if you just want to know how to choose a wet/dry vacuum, here’s a video for you:


Conclusion

In conclusion, the Craftsman wet dry vac is highly recommended for wet pickups like water. The power tool is equipped with a float mechanism which rises as the tank get fuller to a predetermined level where it then automatically cuts off the airflow.

So anytime you are working with your device, and it suddenly ceases suction during a job, or the motor noise becomes higher in pitch dust to increased motor speed, you should know that the float has shut the airflow off.

Well, the liquid capacity varies with the rate of pickups, so what you do is to turn off the vac, unplug the power cord and empty the tank or dust drum. In order not to cause any damage to your vacuum cleaner, do not run the motor with the float in a raised position where water can enter the engine.

We will be happy to hear your thoughts

Leave a reply